The TECH-XL WHEELER is a rolling version of the tried and true TECH-XL tool bag. Featuring additional volume capacity and Veto Pro Pac’s proprietary V-SWAP system, the TECH-XL WHEELER provides a versatile tool storage, organizing and wheeled transport system. The bag comes with innovative V-SWAP removable Tool (mandatory) and Meter pocket panels to allow for customization. Panels are easily swapped out with optional Laptop and Bulk Storage panels, which are available and sold separately.
Specifications
Height (BH): 19in (48cm)
Width (W): 20in (51cm)
Depth (D): 12.5in (32cm)
Handle Height (HH): 22.5in/57cm
Weight (empty): 18lbs/8 kg
Internal Volume: 2500in3/41L
Max Payload: 100lbs/45kg
Capacity
Large front and back zippered storage bays keep tools safe and secure
85 interior and exterior tool pockets of varying sizes
V-SWAP removable tool pocket panel system with alternate tool panels available and sold separately
Front tool panel includes removable sub-panels for interior customization and storing of larger tools
Waterproof Polypropylene plastic base with integral 5in (13cm) wheels and trolley system
Thermoformed protective backside with hinged rub rails
Metal YKK locking zippers
8in Electrical tape strap
T-Bar Tape Roll Chain
Interior gray pockets for better visibility
Magnetic screw catchers
Keep the Zippers Clean and Lubricated
Over time, dirt and grit will clog the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don’t Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!